Opportunity Can Ring My Bell

I have a confession.  An ugly one.  This was my doorbell.

Please be clear....I have tried and tried to do better.  I just haven't been able to find something that was 'me'.

Some options I have explored:

Or possibly???

NO!!!!

But you can see my dilemma.  

Then you know how sometimes two things can just somehow come together in your mind?  Boom! A tutorial was born!!

Simple, pretty and quick.

And we get to play with electricity!

 

Here is all you will need 

An unfinished wooden switchplate

Mod Podge (I used outdoor)

A lovely paper napkin 

Gesso or primer

180 grit sandpaper

Sponge applicator

Screwdriver and/or cordless drill

I also bought a new dark brown cheapo doorbell,

but you could repaint the one you already have if need be

 Lightly sand and gesso or prime the wooden switchplate

I made sure my screw holes lined up correctly (bonus- they did!) and lightly traced where the doorbell housing would go so I could estimate the amount of space I would have left for the design of the napkin to show.  I picked up these lovely spring napkins at Tuesday Morning for $1.70

Once you figure out what part of the napkin you want to use spread a thin coat of Mod Podge on the switchplate.  You are going to get one shot at sticking down the napkin, so hold your breath and bite your upper lip.  Separate the layers of the napkin and just stick the pretty part on.

Smooth it out and tear or cut off the excess.  Add a layer of Mod Podge to the top.  Let dry a few hours and top coat again.  Now the hard part.....walk away for 72 hrs to let it completely cure.  Use a craft knife to cut paper away from the holes in the backplate.

When the wait is over the fun part starts- playing with live wires!

Remove the screws holding the doorbell.  There should be 2 wires connecting it.  Loosen the little screws on the back that hold the wires and carefully remove each one, being sure they do not come in contact with each other.

 Pull the wires through the middle hole of the switchplate, making sure the ends do not touch each other!  Use a screw or find a third hand to hold the plate on the wall while you pick up your doorbell.

 Reconnect the wires to the (new) doorbell and screw it back onto the wall.

I plan to do a different 'theme' for each season, but for now I am just happy to have this to greet my guests!

Happy Spring!!

Thrifty Tiny Trees

Just taking a little break from the holiday madness to show you a little tree display I whipped up a week or so back.  I saw these expensive mini potted trees in a catalog that shall remain nameless (hint- rhymes with bundt cake).

You are reading it right- just under $100.  I wonder if they will throw in some free shipping??  

I spotted a group of mini trees at Hobby Lobby this season for 50% off of $3 each.  Now you're talkin'.....

I used a few cans I had cleaned and saved- a soup can, a large size bean can, and an International Coffee can.  I covered them with black and white damask wrapping paper and finished them off with some ribbon I liked.  I did have red velvet ribbon and the crystal buckles but for my vignette I decided on something a little different.  

It took less than an hour and total cost was conservatively less than $10.

I think they turned out cute!  

Merry Christmas!

walnut chair refurbish

walnut chair refurbish, originally uploaded by ticklish_moose.

picked up this well worn walnut burl chair for $10 at a garage sale. The seat was covered in some darn ugly green fabric, which I removed and recovered with my own embellished design. I painted the seat frame black and just refreshed the rest of the chair with some Old English.

I think it turned out great!

Grammatically Different Plates- Fresh Ideas Tutorial

Imagination is everything. It is the preview of life's coming attractions.

Albert Einstein

'Live-Laugh-Love'

'I Hope You Dance'

'Believe'

OMG! I am LOL because it has all just gotten so ridiculous, IMHO....

Is that what life has become- someone else's catch phrase?  Does it really reflect your thoughts and wishes for the day?  I am thinking "we can do better than this".  

By now you know I love quotes and Bible verses.  I find great inspiration and comfort in many of them.  I think words hold great meaning.  You probably know someone that has a favorite verse as well.  So wouldn't it be great to give someone (or yourself!) the gift of a word phrase that actually has some deeper meaning?  I'm going to show you how with just an inkjet printer and a few inexpensive supplies.

For this project you will need:

• A few ceramic plates (or tiles)

I pick them up all over.  You may have a few lying around, but each of these were purchased for anywhere from .49-$2.00 ea.

• Denatured Alcohol* (find it @ the hardware store)

*flammable- please use in well ventilated area away from flame

  

• Lazertran Inkjet

(click on above link to see where to buy)

 Lazertran has a TON of applications, but for this project we are applying it to a ceramic surface.  I used black type, but you can print colored images if you choose. Don't worry- We'll have more fun with it another day.

•  Spray Polyurethane* (gloss or satin/matte)

* note: MUST be a urethane- acrylics will not dissolve film! 

• a few cotton balls
• a pan of water about 1" deep large enough to hold transfer
• inkjet printer

There are basic instructions that come with the Lazertran, but believe me- it is nothing compared to the voice of experience here.  A few things to consider:

Choose a plate with a specific rim/edge detail to ease the transition from the Lazertran to the edge.  You can see a faint line of the transfer on some types of plates more than others, especially with a curved inner edge.

 Try to make your image a large enough size to come close to the transition line.  It just looks neater.

I thought the gloss urethane gave a better result on my ceramic plates, but consider the original sheen of your item to give it a authentic look.

If you need to sand out any imperfections in your urethane finish- be sure it is fully cured and use a scotchbrite style sanding pad (fine grit) and lightly sand the surface without putting any real pressure on the pad.  Then apply a light final coat. You may also need a sharp pin/needle to prick air bubbles in the transfer.  

Measure your plate ahead of time to determine the size of your phrase.  I like to use Publisher because it has a handy ruler on the side of the page, but use whichever program you are familiar with.  You do not need to "mirror" or flip your image!  Also, I do at least one 'test' sheet on regular paper to be sure I have things the correct size before I print on the Lazertran sheet.  I would much rather waste a cheap piece of copy paper getting things right.

When you have things the way you want it- print on the white side of the Lazertran.  I'm cheap, so I try to get 2 or more projects per sheet.  Allow it to fully dry- 30 mins or so.  If you are impatient you can try a heat gun, but no promises- OK?

I like to find a circle 'template' to use to get the size/centering correct.  You may have a circle cutter.  I do.....somewhere!  If your plate is square, measure twice, cut once ;-)

Use a pencil to mark your cutting line- then cut just inside the line.

Gather your materials on a covered surface

It's good to check the back of the plate so if there is a logo you get it orientated correctly with what will be your finished product.

Dyed to Match Buttons- Who Knew??

Evidently, dye is not just for fabric!!  I wanted to share a tutorial I ran across yesterday that really opened my eyes to some new possibilities.

 This tutorial comes to us from Rit dye, but of course you could probably experiment with some products you had around the house as well.

And- if it dyes plastic and nylon......well, just think of the things that could use a facelift!! 

 

Dyed Buttons

Whether you are a crafter or a sewing fashionista, you will enjoy dyeing buttons. It’s fun and easy to do. Most white buttons are made out of nylon or some type of plastic. Rit is one of the few dyes that will color these materials. That means you can transform ordinary buttons into colorful accents that match or coordinate with whatever you are making.

Assorted White Buttons before dyeing

---

Muffin pan doubles as a button organizer when working on craft projects

Rit Dye colors shown:

• Top: Fuchsia, Lemon Yellow, Violet
• Bottom: Sunshine Orange, Evening Blue, Scarlet

---

Buttons add a colorful accent to flower arrangements!

Rit Dye colors shown:

• Lemon Yellow, Golden Yellow, Sunshine, Orange, Apple Green

---

 Ready to get started??

Still Time For a Homemade Gift.....

The weather outside is delightful these days.  But, being December it is not destined to last.  We have had a very mild and dry fall.  Most of our trees still have not turned colors.  It seems strange to have green leaves on many trees, and Christmas decorations everywhere.  I grew up in Michigan in the crook of the thumb and when I lived up there the first 20 years of my life winter meant SNOW!  Lots and lots and lots of snow.  Truck it down by the Tittabawassee and maybe by June it would be all gone. 

The extraordinary diversity of Texas includes 10 climatic regions, 14 soil regions, and 11 distinct ecological regions.  Here in North Central Texas we have 4 distinct seasons.  That means lots of clothes for everything from zero to 110 degrees!!  We are blessed with a long *flip flop* season, but we definitely also use warm coats, hats, gloves and boots.  Which brings me to this weeks tutorial.  It is a fast, fun upcycle which has a million possibilities for customization and personalization, and it is totally wearable, too!

Isn't this the cutest headband ever?? 

(Not so sure I'm giving this one away)

Here is my finished project:

Once you see how simple these are to make, and basically free, you will never spend $$ to buy one again!  I am totally working on the matching scarf!

Okay- this looks like a lot of steps, but hang in there.....once you get the pattern made it goes really fast.  

Gather some supplies:

I used an old pair of grey sweatpants that no longer fit anyone, and a scrap of red polar fleece left over from another project.  I am also considering using the wording area from a sweatshirt that no longer fits, and a felted sweater.  I hope to have some of those made to show you before Christmas, but no promises.  If you make one, I would love for you to email me the pics, so I can add it to the blog for others to see  :D

You will need basic sewing skills, basic sewing supplies, some paper to make the pattern (I used legal sized printer paper), and freezer paper for the stencil.    

I started by freehand sketching a basic headband shape on a piece of legal paper:

To make it come out even, fold in 1/2 width-wise, then fold in 1/2 length-wise, and refine the shape when you cut it out.  Use your sketch lines as a guide:

Here is the first part of the pattern cut out:

Add some ends to make it long enough:

Trim it to smooth out the shape:

Now you have your pattern!  Cut one of your top fabric (mine is the grey sweats) and one of the lining (mine is red fleece).  Be sure you cut your length with the stretch of the fabric!  I cut out a test pattern from some scraps of plaid fleece just to be sure I liked the size of the band on my head.  I have a pretty *average* sized head, so my pattern size should work for *most* everyone.  If you are the *Big Head* person in your family, (you know who you are) you may want a slightly wider band.  

 Here is the part that took me forever the most time.....picking the graphic!  Lucky you- you can copy my design if you want!

You are welcome to download a copy here:

Grapevine Leaf Stencil 

When I printed it, I used the 'landscape' paper setting, letter size paper, and I 'justified' or stretched it to the length of the paper.

I traced the design loosely onto my freezer paper.  If you want, you can print on the freezer paper.  I wanted to be able to trace it more than once.

 Carefully cut out your design, and iron it onto your fabric, using the 'wool' setting on the iron:

I used VersaCraft ink for fabric in black.  I blotted it on, using my fingers under the fabric to get the edges of the design darker.  You could also use paint for fabric, or add a textile medium to acrylic paints.  Just be sure to heat set after it has dried.  

(Almost) Free Serger!!