A New Flag To Fly

Prayer flags have been a tradition in Tibet and India for thousands of years.  I decided to put a little Ticklish Moose spin on convention and make a few of my own. 

 Traditionally, prayer flags are used to promote peace, compassion, strength, and wisdom. The flags do not carry prayers to gods, a common misconception; rather, the Tibetans believe the prayers and mantras will be blown by the wind to spread the good will and compassion into all pervading space. Therefore, prayer flags are thought to bring benefit to all.

Given the recent events in Aurora, CO I thought this idea I have had floating around in my head was apropos, but these can be used in so many ways- as a banner in a sick friends room, for good wishes to be written at weddings or birthdays, a project for kids to decorate at VBS.....the possibilities are endless.

 I did my project with simple machine sewing, but this could be a hand sewn or no-sew project just as easily. For no-sew just use steam-a-seam type products in place of the sewn areas. 

You will need:
Basic sewing supplies
 2 sheets plain cardstock 
Temporary adhesive spray like Easy-Tack
Laser or inkjet printer
Iron to heat set images
11 feet or longer rope, twine etc.
Fabric as detailed below 

 Woodcut Printables Freebie (click on links)

Prayer Flags Page 1  

Prayer Flags Page 2 

 This could also be old sheeting, broadcloth, lightweight cotton

 I upcycled mens shirts for this because the oxford cloth is pretty on both sides. 

Use whatever lightweight cotton fabric you have on hand. Also- I threw my shirting pieces into the washer and dryer after cutting to get a 'softer' frayed edge look- totally not necessary.

Spray the cardstock with adhesive spray and smooth your muslin onto the tacky side of the cardstock. Trim off the excess with scissors or rotary cutter.

 Print the Prayer Flag images onto your muslin, remove from the cardstock and heat set (press from back side!) and use a press cloth so the ink doesn't transfer to your iron and ironing board cover.  I use a teflon sheet for this purpose.....LOVE it!


Cut each image sheet into 4 equal individual images.

While your iron is hot, fold over 1 long side of the flag pieces by 1", press and pin.

I used a decorative zig-zag stitch to make the pocket for the rope/twine- here is where you can also hand sew or use a thin strip of steam-a-seam to create the pocket for the twine if you choose.

Select one of your images and center (mostly) on the face of the flag. Sew or use steam-a-seam to keep it in place.

Now the fun part- hand them out to family members or guests and have them add their prayers/wishes/hopes and dreams to the Prayer Flag with a Sharpie or other permanent marker.  String them onto your rope/twine and let them fly!

 

And help us, this and every day, to live more nearly as we pray.  ~John Keble 

If you make this craft, please let me know- I would love to post a picture of your project!  

Linking Here:

  An Original Belle
Serendipity and Spice 
Mad In Crafts 

Just a Quickie Re-do

Just when I think I can stay focused a project drags me into it's lair.  I'm not sure where I first saw this brainiac idea for a portable, folding, pretty-much-perfect-height ironing board upcycle but I thought I would do a quick share.  

What is great about this ironing board is you can add some quick table-top area close to where you are working!

First you need an old but sturdy folding TV table.  I have a few around- at the last neighborhood garage sale I picked up a set of 4 for $2.  I had this in mind, but will also more than likely also top one with a flannel-backed vinyl tablecloth for small messy projects.

Next you will need some padding.  You can buy the fancy ironing board cover fabric if you wish, but it is a little pricey and not necessary.  I had some scraps of polyester batting left from an old upholstery project, some smooth white cotton sheeting and I purchased a small/craft size piece of Warm & Natural batting for about $2.50. 

 

 Of course you can use whatever fabric you wish- if you want to co-ordinate with your sewing room etc.  Just be sure that it is not heavily textured because that would transfer to whatever you iron on top of it.

You will also need a few basic tools:

staple gun and 1/2" staples

hammer (for staples that don't lie flat)

pliers (to pull out staples that mis-fire)

scissors to cut fabric

iron to smooth fabric

 optional- drill w/ 1/2" Forstner bit

 

 

 I drilled 4 holes in the tray top to help dissipate the steam, but this is not necessary.  I just like using my drill  :D

 Clean off the tray top and iron your batting and fabrics flat.  I tacked down the poly batting first to help prevent slipping, and then flipped the tray upside down on my layer of Warm & Natural topped with my sheeting.

Now just staple down your layers to the backside like you do for any upholstery project, anchoring each side with a staple before smoothing and finishing each side, then corners.

 Just be sure you staple close enough to the outer edge as to not impede the action of the folding legs.  Trim off the excess fabric and batting.

That's It!!

You now have an easy to store, inexpensive, portable ironing board! 

Happy Crafting!!

You Know You're a Junker When...

You buy this at a flea market while on vacation, have to bring it back in your carry on and having to explain it to the TSA seems like "no big deal" to you:

Totally worth it, IMHO.  I know a few of you are nodding in agreement!

I also wanted to let everyone know I have cornered the market on tassels.  No nasty comments.... I have big plans.  Big plans I tell you!

I would love to hear any and all ideas besides bookmarks that you come up with to use these.  These particular tassels are the small-ish (about 4") size.  I saw a few ideas I would like to share.

 I could simply display them

have a tassel dinner party

 

the obvious

 

never know when you might need a footstool!

 

or use them to make even bigger and better tassels??

 

I'll keep you posted ;-)

walnut chair refurbish

walnut chair refurbish, originally uploaded by ticklish_moose.

picked up this well worn walnut burl chair for $10 at a garage sale. The seat was covered in some darn ugly green fabric, which I removed and recovered with my own embellished design. I painted the seat frame black and just refreshed the rest of the chair with some Old English.

I think it turned out great!

Grammatically Different Plates- Fresh Ideas Tutorial

Imagination is everything. It is the preview of life's coming attractions.

Albert Einstein

'Live-Laugh-Love'

'I Hope You Dance'

'Believe'

OMG! I am LOL because it has all just gotten so ridiculous, IMHO....

Is that what life has become- someone else's catch phrase?  Does it really reflect your thoughts and wishes for the day?  I am thinking "we can do better than this".  

By now you know I love quotes and Bible verses.  I find great inspiration and comfort in many of them.  I think words hold great meaning.  You probably know someone that has a favorite verse as well.  So wouldn't it be great to give someone (or yourself!) the gift of a word phrase that actually has some deeper meaning?  I'm going to show you how with just an inkjet printer and a few inexpensive supplies.

For this project you will need:

• A few ceramic plates (or tiles)

I pick them up all over.  You may have a few lying around, but each of these were purchased for anywhere from .49-$2.00 ea.

• Denatured Alcohol* (find it @ the hardware store)

*flammable- please use in well ventilated area away from flame

  

• Lazertran Inkjet

(click on above link to see where to buy)

 Lazertran has a TON of applications, but for this project we are applying it to a ceramic surface.  I used black type, but you can print colored images if you choose. Don't worry- We'll have more fun with it another day.

•  Spray Polyurethane* (gloss or satin/matte)

* note: MUST be a urethane- acrylics will not dissolve film! 

• a few cotton balls
• a pan of water about 1" deep large enough to hold transfer
• inkjet printer

There are basic instructions that come with the Lazertran, but believe me- it is nothing compared to the voice of experience here.  A few things to consider:

Choose a plate with a specific rim/edge detail to ease the transition from the Lazertran to the edge.  You can see a faint line of the transfer on some types of plates more than others, especially with a curved inner edge.

 Try to make your image a large enough size to come close to the transition line.  It just looks neater.

I thought the gloss urethane gave a better result on my ceramic plates, but consider the original sheen of your item to give it a authentic look.

If you need to sand out any imperfections in your urethane finish- be sure it is fully cured and use a scotchbrite style sanding pad (fine grit) and lightly sand the surface without putting any real pressure on the pad.  Then apply a light final coat. You may also need a sharp pin/needle to prick air bubbles in the transfer.  

Measure your plate ahead of time to determine the size of your phrase.  I like to use Publisher because it has a handy ruler on the side of the page, but use whichever program you are familiar with.  You do not need to "mirror" or flip your image!  Also, I do at least one 'test' sheet on regular paper to be sure I have things the correct size before I print on the Lazertran sheet.  I would much rather waste a cheap piece of copy paper getting things right.

When you have things the way you want it- print on the white side of the Lazertran.  I'm cheap, so I try to get 2 or more projects per sheet.  Allow it to fully dry- 30 mins or so.  If you are impatient you can try a heat gun, but no promises- OK?

I like to find a circle 'template' to use to get the size/centering correct.  You may have a circle cutter.  I do.....somewhere!  If your plate is square, measure twice, cut once ;-)

Use a pencil to mark your cutting line- then cut just inside the line.

Gather your materials on a covered surface

It's good to check the back of the plate so if there is a logo you get it orientated correctly with what will be your finished product.

Bad Blogger is Back With a New 'Old' Lamp Project!

What can I say?  It's been a busy past few months!!  My son returned to High School and so we had to get back into the 'school routine', my Rheumatologist had me try a new medication which did not agree with me at all.  As a matter of fact, lets just say short of my anaphylactic reaction to a few other medications I have had in the past, it ranked right up there on the 'bad experience' scale.

I also got a new great-niece!  After 40 hours of labor (yes- you read that right!)  beautiful (and not just because she is 'ours') baby Arwen was born!

Then I went on an 'antiquing' trip to MI, got some fabulous things, got sick from being stuck in that sardine can they call flying coach, and just barely had time to whip up a fall project!   I tend to decorate for fall, not Halloween.  I don't have any small children and the fall theme takes me through Thanksgiving.

Lately it seems, I have had a 'thing' for lamps.  I don't know why.  Possibly because they are plentiful and inexpensive.  One thing for sure- I will never pay full price for a lamp or shade again!

So here is my 'latest' new 'old' lamp project:

But- as usual- we gotta get there, right?  

I recently bought the barley-twist lamp in the photo at our neighborhood garage sale for $3.  I switched out the shade for a narrower one I had on hand from a different lamp I was not currently using so I could group the lamps together.  I think it makes for a kinda neat display  :)

The 'project' lamp is an old, sad 8" tall (minus the shade) glass lamp I got at the local thrift for $4.49.  You know the kind- popular in the 1980's.  Depending on your age, you may already have one around the house  ;-)

.

Be sure to look at the bottom to see that it is easily taken apart by undoing the wing-nut that holds the threaded rod that goes up the middle.  Just undo it, loosen the cord up through the lamp and you are ready for spray paint.

 I used black satin spray paint and put a little blue tape around the cord to keep the paint off.  Paint the base, and the brass-colored threaded rod that goes in the center.  Of course, you can use whatever color suits you and your project.  Clean the glass and get ready to fill it up!  You could use pine cones, acorns, candy corn.....I chose these cute mini pumpkins and threw in a few small pine cones from my stash.

Owlies- A Free Owl Pattern and Tutorial!

I am one of those people blessed with great family members.  Not to say we don't have our issues, fight now and then like families do or have a weirdo or two (which I am convinced is NOT me).  But all in all, through thick and thin we love each other to pieces.

So imagine my delight at finding out that one of my nieces was expecting a baby.....and a girl at that!  You know, I do love all things girly.  And who can resist a sweet little baby?  Unfortunately, my niece is full-term and has been in the path of Irene, but baby stayed put (whew!) and the power is back on in their area.  You know how the end of your pregnancy is.  And you can imagine she was thinking "Seriously?!? A freakin' HURRICANE?"

Well, enough of that.....back to me.

I wanted to make something special for baby, and much to my delight the 'theme' was owls, and the color of the nursery was to be green and brown.  I had seen a cool mobile some time back and had been wanting to try one- I just knew it was the project for me!  Originally I was going to attach the owlies by ribbons to a wooden embroidery hoop, but soon became obsessed with making it musical as well.  I scoured all of the local thrifts for gently used baby mobiles to no avail.  I was running out of time when I stopped into a Kid to Kid store to see what they had.  And wouldn't you know it- amongst  the pink Care Bears  and blue Cars mobiles I found this:

The perfect base for my newest creation!  
Couldn't wait to cut those sports figures off!!


I could not find an owl pattern anywhere that was exactly what I needed, so I made my own.  Feel free to download and use it, but please give a link back or shout out-K?  

 


Download Full Size Pattern Here


Suitable materials for this project are felt (wool or poly), suede or leather (I upcycled some old jackets), suit weight woolens (once again, I upcycled), quilt weight cotton for the tummy, and whatever buttons, embroidery threads, ribbons, etc. you would like to add.  I stuffed mine with a high quality poly fluff filling and sewed it on the machine, but you could easily also sew these by hand with a blanket or back stitch.


Cut out the pattern pieces from whatever fabrics you have chosen.  I used fusible web on the back of my cotton tummy piece to hold it in place while I stitched it on, and used a decorative stitch, but that is your discretion. 

Ribbon Storage Idea- A 1 Hour Craft

Do you ever spend way too much time looking for something to fulfill a storage or space requirement and then think "duh.....I can just MAKE that!" ?

I have had this idea for vertical ribbon storage for some time now.  I kept thinking about possibly modifying a paper towel holder but the bases are typically too large.  Then the other day I was clearing out some stuff from a shelf in the shed and realized I had everything I already needed!  Booyah!

This is what it looks like completed

 

This is the pile of junk supplies that started the process

I also used some wood glue, a little 220 grit sandpaper, black spray paint, and ended up using a wooden spool on the top.  My husband was nice enough to put together a cute little power tool kit just for me..........guess he got tired of the endless 'honey-do's' and looking for his tools  :)   So I got to use my awesome new cordless drill on this project!  

The 2 inch diameter wooden disc is a cedar block that had lost it's scent.  Any size piece of wood would work as long as it is larger than the wheel.  The hole in the wheel was not quite large enough to push the dowel into, so I used my handy drill to make the hole the correct size, added a little glue to the bottom edge of the dowel and stuck them together.

Then I just glued the disc to the top of the candlestick, and the wheel with dowel attached to the disc.  I let the whole thing dry about an hour.

Dyed to Match Buttons- Who Knew??

Evidently, dye is not just for fabric!!  I wanted to share a tutorial I ran across yesterday that really opened my eyes to some new possibilities.

 This tutorial comes to us from Rit dye, but of course you could probably experiment with some products you had around the house as well.

And- if it dyes plastic and nylon......well, just think of the things that could use a facelift!! 

 

Dyed Buttons

Whether you are a crafter or a sewing fashionista, you will enjoy dyeing buttons. It’s fun and easy to do. Most white buttons are made out of nylon or some type of plastic. Rit is one of the few dyes that will color these materials. That means you can transform ordinary buttons into colorful accents that match or coordinate with whatever you are making.

Assorted White Buttons before dyeing

---

Muffin pan doubles as a button organizer when working on craft projects

Rit Dye colors shown:

• Top: Fuchsia, Lemon Yellow, Violet
• Bottom: Sunshine Orange, Evening Blue, Scarlet

---

Buttons add a colorful accent to flower arrangements!

Rit Dye colors shown:

• Lemon Yellow, Golden Yellow, Sunshine, Orange, Apple Green

---

 Ready to get started??